Contact Us

Cooling Technology Inc
1800 Orr Industrial Court
Charlotte, NC 28213

Phone: (704) 596-4109
Fax: (704) 597-8697

Contact Us

Home » Products » Compact Chillers » EBR SeriesPrint Page

EBR Series

Protect Your Chiller
Designed to protects a chiller’s evaporator from particulate contamination from the extrusion bath, Cooling Technology’s EBR is a pre-piped, pre-wired compact closed loop recirculation system engineered to isolate quench baths and other liquids from central cooling system.  The EBR is ideal for closed-loop cooling of quench baths, extrusion lines, oil reservoirs and other liquids where migration of fluids is not desired.

Built To Last
From the best available compressors to our NEMA 4 electrical panels and everything in between, Cooling Technology systems are constructed with quality.


  • Includes pump, reservoir, heat exchanger and controls in a compact integral design.
  • Compact, stainless steel plate and frame brazed heat exchanger transfers the heat from bath or tank to the central chilled water system.
  • The single-pass flow design offers excellent heat transfer with a low-pressure drop.  When the frame compression bolts are removed, the end frame slides away for inspection and cleaning.
  • An industrial duty, close-coupled pump is sized to circulate fluid at the correct flow rate and pressure to provide close bath temperature control and maximum heat transfer efficiency.
  • The tank is an amply-sized epoxy coated steel reservoir that accepts overflow volume.
  • The tank is insulated with ½” closed cell foam and has an easily removable large area screen to catch particulates from the bath.
  • The tank includes a sight glass, cover, drain, overflow andautomatic water make-up valve.
  • A stainless steel filter element removes  particulate in the bath fluid.
  • NEMA 12 rated electrical control panel features pump motor overloads, contactors, switches and lights. 
EBR Series Cooling System


  • Stainless steel tank.
  • Fully trimmed and wired stand-by pump.
  • Swivel casters for rolling under bath tank


Contact Us

Cooling Technology’s easy-to-use standard microprocessor controller offers a wide setpoint temperature range, from -58°F to 194°F.
All Cooling Technology water piping is manufactured with non-ferrous material to ensure clean process water and a corrosion-free environment. Completely insulated with closed cell foam, our design approach conserves energy.
Cooling Technology’s standard safety mechanisms include a high refrigerant pressure relief valve, automatic high and low refrigerant pressure cut-off, and—on the process side—low flow cut-off and freeze protection.
From the best available compressors to our NEMA 4 electrical panels and everything in between, Cooling Technology systems are constructed with quality.
All Cooling Technology chillers are fully-wired, fully-charged, and factory tested under load conditions to ensure easy installation and successful start-up.

Technical Specifications

Technical Specs